Certified & Fully Insured · NYS Clean Heat Participating Contractor
Serving the Capital Region: Albany, Schenectady, Troy, and beyond

Home / Services / HVAC Installation

HVAC Installation

HVAC Installation in the Albany–Schenectady–Troy Area

Astello does ductless HVAC installation — high-efficiency heat pumps and mini-split systems that heat and cool your whole home with no ductwork — across the Albany–Schenectady–Troy area. Free estimates, and we handle your NYS Clean Heat rebate paperwork.

15+

Years installing across Upstate NY

5.0

Average Google rating

100%

NYS Clean Heat rebate paperwork handled

Modern HVAC installation built for Upstate NY homes

A ductless heat pump is the most efficient way to handle heating and cooling in one system. Instead of a furnace plus a separate AC, one mini-split setup keeps every room comfortable year-round — and because it runs on electricity, it qualifies for NYS Clean Heat rebates. Most installs take a day or two, and the crew that quotes your job installs it.

Astello LLC multi-zone mini-split heat pump condenser installed in Albany, NY.

What's included in every installation

Book your free estimate

Tell us about your home and we’ll put together a clear, no-pressure quote — usually within a day.

Proof, not promises

The NYS Canal Corporation heats its locks with our installs

Astello LLC installing a Senville commercial heat pump system at the NYS Canal Corporation.Commercial install

Cold-climate heat pumps in eleven lock buildings

11lock buildings60 milesof the Champlain CanalCold-climaterated well below zero

The New York State Canal Corporation brought us in to install cold-climate heat pumps in eleven of its lock buildings — every lock on the Champlain Canal, from C-1 in Waterford to C-12 in Whitehall. (There is no Lock C-10. It was never built.)

Lock buildings sit right on the water and take the full force of an Upstate winter. There is no backup furnace out there — the heat pumps are the heat. That’s the kind of job you only get by doing this work properly.

The locks we heat

C-1 · WaterfordC-2 · HalfmoonC-3 · MechanicvilleC-4 · StillwaterC-5 · NorthumberlandC-6 · Fort MillerC-7 · Fort EdwardC-8 · Fort EdwardC-9 · Smiths BasinC-11 · ComstockC-12 · Whitehall
An outdoor Senville ductless condenser mounted on a ground stand with white decorative gravel in the Capital Region, NY for NYS Canal CorporationAn indoor ductless mini-split unit installed at the NYS Canal Corporation
What it means for your home

If it heats a lock building in January, it will heat your living room

Your house gets the same equipment and the same process: a Manual J load calculation from your home’s actual data — not a square-footage guess — then a system sized for the coldest day of the year, installed clean and to code.

Curious what a project like this actually costs? Our cost guide walks through real project numbers, including a whole-house conversion that came to about $32,000 before a $12,000 NYS Clean Heat rebate. The exact number for your house comes from a free in-home estimate.

Why Astello

Why homeowners across the Albany–Schenectady–Troy area choose Astello

Local installers, not a call center

We’re an Upstate NY company. The same crew that quotes your job installs it — on time, tidy, and respectful of your home.

Built for real NY winters

Modern ductless heat pumps keep heating efficiently well below zero, so one system covers summer cooling and winter heat.

Rebates handled for you

As a NYS Clean Heat Participating Contractor, we file your rebate paperwork so the savings come straight off your project.

How it works

Simple, transparent process

1

Free estimate

We visit your home, talk through your comfort goals, and size the right system for your space.

2

Clear proposal

You get a flat, all-in quote with equipment, labor, and rebate savings spelled out. No surprises.

3

Professional install

Our crew installs your mini-split — usually in a day or two — and cleans up when we’re done.

4

Start-up & rebates

We test everything, show you how it runs, and file your NYS Clean Heat paperwork for you.

Brands

Brands we install & credentials we hold

Mitsubishi Electric
Cooper & Hunter
Senville
NYS Clean Heat
NYSERDA
EPA Certified
FAQ

HVAC installation, answered

It depends on the size of your home, how many zones you need, and the equipment you choose. Single-zone systems typically run $5,000–$9,000 installed; whole-house projects run well into five figures before NYS Clean Heat rebates. Our cost guide has real project numbers — and your exact price comes from a free in-home estimate with a flat, all-in quote.

Yes. A ductless heat pump heats and cools your whole home from one system, so it replaces both a furnace and a separate air conditioner. For most Upstate NY homes it’s the most efficient HVAC setup available.

It will. Cold-climate heat pumps are built to heat efficiently well below 0°F, so a single system handles the coldest Capital Region nights and summer cooling alike.

No. Indoor units mount on the wall or ceiling and connect to the outdoor unit through a small line set, so there’s no ductwork required. It’s a great fit for older homes and additions.

Most installs are finished in one to two days, depending on how many zones you’re adding. We work around your schedule and clean up when we’re done.

We install Mitsubishi Electric, Cooper & Hunter, and Senville heat-pump systems and help you pick the right one for your home. We also service most major brands.

No — and that’s on purpose. Astello installs ductless heat pumps and mini-splits; that’s all we do. No gas furnaces, no duct runs. If your project truly needs ductwork, we’ll tell you we’re not the right fit — but for most homes here, ductless is the better answer: no ducts to build, every room on its own control, and NYS Clean Heat rebates on qualifying systems.

Need service in your town?

Get a free, no-pressure estimate from your local Albany–Schenectady–Troy team.

FAST BOOKING

Get a Free Estimate Today

No spam • We call you back fast • Same-day slots available